Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

May 23 2016

Bottle rack

I always hated how the beer (and other) bottles roll around in the uppermost fridge shelf. Thaty why I made this rack which can hold 10 bottles (I think cans work too). It is designed to be cut from 3mm material.

Just cut the Spacer.dxf once and the hole_plate.dxf twice and glue the two big pieces together using the spacers.

Bottle rack

I always hated how the beer (and other) bottles roll around in the uppermost fridge shelf. Thaty why I made this rack which can hold 10 bottles (I think cans work too). It is designed to be cut from 3mm material.

Just cut the Spacer.dxf once and the hole_plate.dxf twice and glue the two big pieces together using the spacers.

Toothbrush holder v2.0

I redesigned the toothbrush holder I made a while ago because I got a new electric toothbrush with a new charging dock. While I was working on it I also decided to make a version with space for 4 bruch heads.

Cut the file with the number of slots you want out of 3mm material (I recommend acrylic) and glue the pieces together as you can see it in the CAD screenshots.

Toothbrush holder v2.0

I redesigned the toothbrush holder I made a while ago because I got a new electric toothbrush with a new charging dock. While I was working on it I also decided to make a version with space for 4 bruch heads.

Cut the file with the number of slots you want out of 3mm material (I recommend acrylic) and glue the pieces together as you can see it in the CAD screenshots.

May 17 2016

May 14 2016

Replacement Link for Strandbeest model

Replacement link for the Strandbeest kit made by Gakken.

I had a part in my kit which wasn't complete so I designed a replacement in my CAD software and a friend printed this for me. Full blog post for my strandbeest: https://regendrogenbogen.wordpress.com/2016/05/14/3d-drucker-zur-rettung-strandbeest-3d-printer-to-the-rescue-strandbeest/

Your printer should be calibrated very well because the tolerances are quite tight on this part.

I would recommend to print this with an high infill rate to make it sturdy.

Replacement Link for Strandbeest model

Replacement link for the Strandbeest kit made by Gakken.

I had a part in my kit which wasn't complete so I designed a replacement in my CAD software and a friend printed this for me. Full blog post for my strandbeest: https://regendrogenbogen.wordpress.com/2016/05/14/3d-drucker-zur-rettung-strandbeest-3d-printer-to-the-rescue-strandbeest/

Your printer should be calibrated very well because the tolerances are quite tight on this part.

I would recommend to print this with an high infill rate to make it sturdy.

January 13 2016

Periodic table

A periodic table I made with Inkscape for my sister as an birthday present.
I used the "Karisma Stencil" font from dafont.com: http://www.dafont.com/karisma-stencil.font
You'll need about 600x1050mm of vinyl foil for the black part.
If you also want to make one, it's pretty straight forward:
Download, resize if necessary (I cant guarantee that the small lines will still stick!) and cut it.
Place the small colored corners by hand after the black part.

Periodic table

A periodic table I made with Inkscape for my sister as an birthday present.
I used the "Karisma Stencil" font from dafont.com: http://www.dafont.com/karisma-stencil.font
You'll need about 600x1050mm of vinyl foil for the black part.
If you also want to make one, it's pretty straight forward:
Download, resize if necessary (I cant guarantee that the small lines will still stick!) and cut it.
Place the small colored corners by hand after the black part.

October 02 2015

Leonardo da Vinci inspired glider

I designed this glider for a short workshop at a "young university" aimed at 11 to 14 year olds.
It is inspired by the various flying machines designed by Leonardo da Vinci but I kept the design simple. Even though I don't know much about aerodynamics the glider flies pretty well. It is only missing a vertical tail wing which would stabilise the flight.
I added a gondola so the kids can add a toy figure which can fly with the glider.

You can read a bit more about it on my blog: https://regendrogenbogen.wordpress.com/2015/10/02/flugmaschine-nach-den-entwuerfen-von-leonardo-da-vinci-flying-machine-inspired-by-the-designs-of-leonardo-da-vinci/

If you don't have any access to a laser cutter at all, you can buy the kit on Etsy: https://www.etsy.com/shop/DaVinciModelShop

Leonardo da Vinci inspired glider

I designed this glider for a short workshop at a "young university" aimed at 11 to 14 year olds.
It is inspired by the various flying machines designed by Leonardo da Vinci but I kept the design simple. Even though I don't know much about aerodynamics the glider flies pretty well. It is only missing a vertical tail wing which would stabilise the flight.
I added a gondola so the kids can add a toy figure which can fly with the glider.

You can read a bit more about it on my blog: https://regendrogenbogen.wordpress.com/2015/10/02/flugmaschine-nach-den-entwuerfen-von-leonardo-da-vinci-flying-machine-inspired-by-the-designs-of-leonardo-da-vinci/

If you don't have any access to a laser cutter at all, you can buy the kit on Etsy: https://www.etsy.com/shop/DaVinciModelShop

July 09 2015

regendrogenbogen
Reposted frompseikow pseikow viamynnia mynnia

June 15 2015

regendrogenbogen
7747 d3c3
Reposted fromrodery rodery vianickless nickless

June 10 2015

regendrogenbogen

italian-luxury: Cliffs of Santorini

Reposted frommr-absentia mr-absentia vialydschi lydschi

June 06 2015

regendrogenbogen
Reposted fromkelu kelu

June 01 2015

8959 a4e5 500
Reposted fromtwice twice viaylem235 ylem235

May 31 2015

regendrogenbogen
2799 66ea 500
Reposted fromdelnoch delnoch viaschlingel schlingel

May 26 2015

9007 56a2
Reposted fromsoplica soplica viajuliwieaugust juliwieaugust
Older posts are this way If this message doesn't go away, click anywhere on the page to continue loading posts.
Could not load more posts
Maybe Soup is currently being updated? I'll try again automatically in a few seconds...
Just a second, loading more posts...
You've reached the end.

Don't be the product, buy the product!

Schweinderl